save signals from a big extracted view.

Discussion in 'Cadence' started by Juan Felipe Osorio, Jun 1, 2004.

  1. Juan Felipe Osorio

    Juan Felipe Osorio Guest

    Hi,

    There is some way to select ,automaticly, signals in a big circuit to be
    saved?.

    I have tried the follow option without success: I've get the signal
    information from the netlist using a perl script, next I've added lines like
    save(i("/I52/_inst33/B) (This is the bulk current from the transistor
    _inst33 in the instance I52). And finaly I've run the oceanScript.ocn using
    ocean. However when I try to see this signal using ocean it does not appear
    in the signals saved (using outputs()).

    Thanks in advance



    Juan F. Osorio

    High Performance Integrated Circuits Design Group

    Universistat Politecnica de Catalunya

    Barcelona - Spain
     
    Juan Felipe Osorio, Jun 1, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Running simulation using assura extracted view

  2. Save outputs in extracted netlist - Filter in Results Browser

  3. spectre hung? any other way of doing spice netlist extraction from extracted view for post-layout si

  4. HOW could I search a place in the extracted view<<<<<<<<

  5. transistor OP from extracted view

  6. How to create an Hspice netlist from extracted view?

  7. Simulate extracted view

  8. Need Model - Big Block Chevy (or Dart Big M Sportsman)

Loading...