RTOS problem

Discussion in 'AutoCAD' started by RaghuMN, Feb 10, 2005.

  1. RaghuMN

    RaghuMN Guest

    Hi all,

    I have a problem with RTOS function.

    In one drawing, when I submit (rtos 25 2 2), result is "25.00".
    In another drawing, I get "25" (not "25.00", which I need)

    I have compared the system variables between 2 drawings, but could not make out the reason.

    Any one know solution to this?

    Thanks,

    MNRaghu
     
    RaghuMN, Feb 10, 2005
    #1
  2. RaghuMN

    Jürg Menzi Guest

    Hi RaghuMN

    Check 'DIMZIN' sysvar, must be <4 for decimal numbers.

    Cheers
     
    Jürg Menzi, Feb 10, 2005
    #2
  3. RaghuMN

    RaghuMN Guest

    Juerg,

    Perfect!!.

    Thanks,
    MNRaghu
     
    RaghuMN, Feb 11, 2005
    #3
  4. RaghuMN

    Jürg Menzi Guest

    Glad to help you...¦-)

    Cheers
     
    Jürg Menzi, Feb 11, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Special Hatch Problem

  2. UCS Direction problem.

  3. Entmake 3D Polyline Problem without attachment

  4. strcat problem

  5. Error Problem - Plotting Problem

  6. (setq freespace(rtos

  7. rtos not working...

  8. Error Problem - Plotting Problem

Loading...