Ricoh 240W

Discussion in 'AutoCAD' started by John Colby, Sep 16, 2004.

  1. John Colby

    John Colby Guest

    Anyone using the Ricoh 240W? Care to share your experiance with it?
    Someone's pitching the Ricoh to me. I'm wondering if it would be worth
    giving up my Oce TDS400 for it.
    The stats seem to be similar. I'm mostly concerned about reliability and the
    software that come with it.
     
    John Colby, Sep 16, 2004
    #1
  2. John Colby

    wombat Guest

    No
     
    wombat, Sep 17, 2004
    #2
  3. John Colby

    Grantus Guest

    Hey John,

    This is Dave DeVillers, used to be at C & R?

    Are you speaking of the Ricoh from C & R? I think that was a RW470, if
    it is.

    Good output from that machine, but the reliability compared to the Oce
    would be questionable. Software is funky, too, but learnable.

    I would stick with the Oce.

    Note I will be at Lauterbach, speaking to Anne Randall concerning plan
    rooms. That is on Tuesady, 10/26.

    I am with CyberCopy now, go figure....

    Hope all is well and take care,

    -Dave
     
    Grantus, Oct 25, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Ricoh RW470 agony!

  2. Ricoh 470W Large format "?"

  3. Ricoh Aficio 240W

  4. Printing/Plotting Color 11x17 - Review of Ricoh 2228c

  5. Driver for Lanier 5255 / Ricoh Aficio 550?

Loading...