Replace Face

Discussion in 'SolidWorks' started by Corey Scheich, Apr 5, 2004.

  1. Corey Scheich

    Corey Scheich Guest

    Shouldn't Replace Face use the same internal ID as the original face. This
    way you are really replacing the face not making a cut or otherwise. I
    tried to do a replace face on a cutout instead of messing with the
    dimensions of a sketch, this caused the dims in the drawing to go dangling.
    Damn after looking at the help I noticed that their examples show using
    differently shaped faces to replace. I guess that wouldn't allow you to use
    the same I-ID. Maybe I should put in an enhancement.

    Corey
     
    Corey Scheich, Apr 5, 2004
    #1
  2. Corey Scheich

    Arthur Y-S Guest

    As far as I know the replace face does just that. the under lying I-ID is
    gone and the new face takes over. i coudl be wrong on this...
     
    Arthur Y-S, Apr 6, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Please HELP: need routine to select the face of a solid

  2. 3D Face from closed polyline

  3. "Union" fail.Inconsistent edge-face relationship?

  4. shortcut to copy face

  5. Component face references in assembly

  6. Igs translation and face/surface extraction

  7. Cam pocket on cylinder face

  8. replace face

Loading...