reordering scketched bens doesnt prevent "self intersceting part" warning

Have you tried using the setting at Tools, Options, Performance, Ignore
self-intersection check for some sheet metal features?

 

Recently I made a relative simple sheet metal part which has 4 sketched
bends. on first configuration of the part, the second sketched bend angle is
small enough to not cause the part to self intersect (while the other bends
are still permanently suppressed). on the second configuration the angle is
larger and the part is entering the permanently state of self-intersection,
however after rebuild and forward rolling of the rest of the sketched bends
the part is not actually self-intersecting although a warning on sketched
bend number 2 appears (when clicking "what's wrong" solidworks refers to
self intersection state of the part).

Because I made first of all, the first configuration in which the order of
the bends is irrelevant, and afterwards I made the second configuration
where the second bend (in order of creation) has received a new value which
caused the feature to get a warning of self-intersection status, I thought
the most elegant and quick solution to this is to change the order of this
bend so it will not create a self intersecting object. to my surprise it
didn't affect solidworks at all and the warning remains intact.

Can anybody shed some light on it please?

Thanks,
Gil

 

Matt, thanks for your help attempt. I didn't know this setting exists (may
be handy some day i guess). now that you mentioned it, i tried it, and it
doesnt help at all - the warning remains as before.

BTW, i made some further investigation on the bend order as it reflects on
the flattend feature and on the sketch bend features and discoverd that
there is no correlation between them what so ever!! so actualy my real
question is: what the hell is going on here? am i crazy or is something
fudemantaly flawed in solidworks? and does this "bend order" parameters have
any meaningfull use at all in solidworks? or is it intended just for
decorating the feature manager tree with beautiful and unmeaningful branches
and signs!?

P.S. I am using SW2006 SP3.4