Raster plotting on HP1055CM

Discussion in 'AutoCAD' started by R. Laygo, Sep 17, 2003.

  1. R. Laygo

    R. Laygo Guest

    I have a problem with plotting an Acad 2002 drawing that contains a scanned
    image. When generating a plot it takes an awfully long time, and if made
    into a .plt file turns out to be like 200Mb. The plotter gets an error and
    does not plot because it cannot handle the size. On the HP B-size laser, it
    goes through but after a long time.

    What driver should I be using? I remember when A2k first came out, I had to
    change the Heidi (HDI) and other files to optimize. I am using a network
    plotter, so I if it's something I can control from my C: drive, it's easier
    for me.

    Thanks for your help.

    R. Laygo
     
    R. Laygo, Sep 17, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HP1055CM prints Photographs with too much red.

  2. Problem plotting to Adobe Acrobat with embedded raster image

  3. HP1055CM Error

  4. Plotting Raster images: "Processing Image" repeats on and on

  5. Plotting Raster Images---HELP

  6. Problems plotting text and lines over raster image

  7. Problem Plotting Overlay Raster on Xerox 8830

  8. Hp1055cm - plotting in color

Loading...