Radial Draft

Discussion in 'SolidWorks' started by bake420, Apr 13, 2006.

  1. bake420

    bake420 Guest

    has anyone any experience on trying to apply radial draft
    i have a hollow cylinder with some locking features that need 2.5'
    radial (revolved) draft
    revolving the draft in the features is not working so much (multiple
    revolves)

    thanks for any help
     
    bake420, Apr 13, 2006
    #1
  2. bake420

    alphawave Guest

    can you post a link to a pic or a swx file pls

    Kev
     
    alphawave, Apr 14, 2006
    #2
  3. bake420

    That70sTick Guest

    "Revolving a draft"? Please explain.
     
    That70sTick, Apr 14, 2006
    #3
  4. bake420

    matt Guest

    If you're talking about drafting the ends of a cylinder whose axis is
    perpendicular to the direction of pull, "radial draft" would still leave
    a section of 0 deg draft at the PL. The closest thing to something
    that does "radial draft" might be a ruled surface, and then a replace
    face or cut with surface.
     
    matt, Apr 14, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Draft angle limits

  2. Surface Analysis: Slope vs Draft

  3. Rib with constant draft, variable depth.

  4. tips backlog - draft analysis

  5. Draft Quality Views macro

  6. Draft, configs & design table

  7. cut sphere with draft

  8. Draft Question

Loading...