Question about IP Address

Discussion in 'AutoCAD' started by Jon Milstead, Jul 16, 2003.

  1. Jon Milstead

    Jon Milstead Guest

    Can anyone tell me how to find or set a new IP Address for a network
    plotter? We have been experiencing network problems and I don't know how to
    reconnect to my plotter. Any setup info would be appreciated. Thanks
     
    Jon Milstead, Jul 16, 2003
    #1
  2. Jon Milstead

    Jason Wilder Guest

    Wow, that's a pretty vague request...

    Assuming you are running DHCP, I'd recommend reserving an address set for
    your printers (i.e. 192.168.1.220-230), then in the configuration for the
    printer/plotter, program in a static IP address, subnet, etc.

    I don't think it's much different if you're not running DHCP, though it's
    been awhile since I've operated a static network.
     
    Jason Wilder, Jul 16, 2003
    #2
  3. Jon Milstead

    Govert J. Knopper Guest

    What plotter, what network interface or printserver? This can often be set
    on the frontpanel, or with a utility on the setup CD that was supplied with
    the plotter; it will search for the device on your network. If you already
    know (found out) the ip address, in the case of a modern plotter /
    printserver, you can also change the ip address with your webbrowser - just
    use the current ip address in the address box of your browser, log-in and
    change the network settings.

    Govert
     
    Govert J. Knopper, Jul 16, 2003
    #3
  4. Jon Milstead

    Vladimir Michl Guest

    Vladimir Michl, Jul 16, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. using a lisp memory address

  2. using a lisp memory address - messages removed

  3. how to get mac-address ?

  4. Chad Wanless (objectDCL) e-mail address

  5. Chad Wanless an Scottie e-mail address

  6. Decoupled Address

  7. Solidworks program accessing stored E-mail address? Virus?

  8. What is the 3 gig switch and can MS address a 9 gig swap file?

Loading...