publish - plots not centered

Discussion in 'AutoCAD' started by bcf, Feb 20, 2004.

  1. bcf

    bcf Guest

    I have a page setup which I use to plot dwgs at a half scale. It works fine on all dwgs when plotting using the regular plot dialogue box. It selects "Extents" as plot area, "center plot" is on and scale is 1:2

    When I use publish to batch plot several dwgs at once the plots are pushed to the right so that part of the title block is cut off. I have double checked several times and I am using the same page setup in publisher as I use when plotting one at a time.

    Anyone with a similar problem / solution ?
     
    bcf, Feb 20, 2004
    #1
  2. bcf

    Talsky Guest

    Try changing from Extents to Layout.

    Once I did that I enjoyed plotting a lot more.

    Jack Talsky



    fine on all dwgs when plotting using the regular plot dialogue box. It
    selects "Extents" as plot area, "center plot" is on and scale is 1:2
    to the right so that part of the title block is cut off. I have double
    checked several times and I am using the same page setup in publisher as I
    use when plotting one at a time.
     
    Talsky, Feb 22, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Publish command not loading Acaddoc.lsp

  2. centered text

  3. rectangular extruded hole centered on rectangular surface?

  4. Plots not centered - HP120 plotter

  5. Plots not using paper size

  6. Batch plots not centered

  7. Publish not publishing

Loading...