protusions in assembly mode

Discussion in 'SolidWorks' started by ryan, Aug 31, 2004.

  1. ryan

    ryan Guest

    Can you make a protrusion on an assembly? or at least use features
    off of an assembly as referneces to a new sketch of a part?
     
    ryan, Aug 31, 2004
    #1
  2. ryan

    Sporkman Guest

    Of course you can. You can either create an Assembly Feature (a feature
    that only appears in the Assembly itself, not in the Part files
    comprising the Assembly) or you can Convert or Offset sketches or edges
    from a Part in an Assembly to another Part while editing that part in
    Assembly Mode. See Help on "top-down design".

    'Sporky'
     
    Sporkman, Aug 31, 2004
    #2
  3. ryan

    kenneth b Guest

    Of course you can. You can either create an Assembly Feature (a feature

    um, i think you can only add a cut(s) in an assy.
     
    kenneth b, Aug 31, 2004
    #3
  4. ryan

    Sporkman Guest

    Ack -- you're right. I was thinking about Welds . . . but those are
    also Parts.
     
    Sporkman, Aug 31, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Chip Assembly and Pad Assembly in ICC???

  2. How to open Layout in Turbo mode, w/ DRD on in "Notify" mode ??

  3. Projecting a reference in assembly mode

  4. Projecting a reference in assembly mode

  5. Is it possible to pick features and dimensions in assembly mode?

  6. How do I control the display of finish symbols in part and assembly mode

  7. Large assembly mode in drawings!

  8. RC-Delete Bodies-not there-Assembly-Edit Part mode

Loading...