Project using Curve Thru Ref Points

Discussion in 'SolidWorks' started by Muggs, Sep 3, 2004.

  1. Muggs

    Muggs Guest

    Is it not possible to use a Curve Thru Reference Points to project on to a
    surface???
    SW doesn't seem to want to allow me to select the Curve Thru Reference
    Points curve.

    TIA,
    Muggs
     
    Muggs, Sep 3, 2004
    #1
  2. Muggs

    Corey Scheich Guest

    Try
    Insert>Curve>Projected

    Corey
     
    Corey Scheich, Sep 3, 2004
    #2
  3. Muggs

    matt Guest

    You can only project 2d sketches, even if the curve is 2d it can't be
    projected. What you will have to do is convert entities into a sketch,
    then project the sketch. Would be nice to be able to project, offset, copy
    curves.

    matt
     
    matt, Sep 3, 2004
    #3
  4. Muggs

    Muggs Guest

    OK, Thanks Matt,

    I just wanted to make sure that I wasn't missing something.

    Muggs
     
    Muggs, Sep 3, 2004
    #4
  5. Muggs

    Mike J. Wilson Guest

    In 2005 you can sketch on a curved surface. Not sure if that
    will help.

    Mike
     
    Mike J. Wilson, Sep 4, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SKILL Q: Lispish version of "obj1~>points = obj2~>points"

  2. Helical curve swept on a helical curve

  3. Curve Trough Free Points Enhancement

  4. Pointing a drawing ref'ing a part to ref an assy?

  5. thru versus thru-all -the final thread?

  6. Importing points or a curve

  7. Diff btwn .Vba project vs .Dvb project

  8. convert ACAD points into C3D points

Loading...