Problems with xrefs and visretain.

Discussion in 'AutoCAD' started by Brian Naught, Apr 29, 2004.

  1. Brian Naught

    Brian Naught Guest

    I am having a problem with xrefs showing up in some of my drawings.
    The xref is "Unresolved" and none of the geometry shows up. If I
    change my "Visretain" to "0", save, and then re-open the drawing, all
    the geometry is there and the xref is "loaded". The problem is that
    now all my layers are messed up. I purge, audit, set my "Visretain"
    back to "1", save and then re-open the drawing, and the xref is
    "Unresolved" and nothing shows up. I have run into this problem in
    the past and had to re-create the drawings. I don't know if there is
    a fix for this, but if anyone has any ideas I would appreciate it. I
    would also like to know what is causing these problems, so I can avoid
    them in the future. Thanks.

    Brian
     
    Brian Naught, Apr 29, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.