Problems with pin connection

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by michlis, Dec 14, 2006.

  1. michlis

    michlis Guest

    Hi,
    I'm working in ProE (wildfire 3) on a model of a glider. I started with
    an assembly and made all basic parts there. Now I wanted to move into
    more details so I opened the wing part and made a cut for aileron and
    also saved this cut as separate part. Now when I try to put this part
    (aileron) into assembly and connect it to the wing with pin connection
    I get an error "selected axis in first constrain is in the ground body"
    and connection cannot be established.
    How can I solve this problem? Is my approach wrong (working in assembly
    then modifying and saving new part and putting it back to assembly?).
    Thanks in advance for any help.


    Mike
     
    michlis, Dec 14, 2006
    #1
  2. michlis

    David Janes Guest

    The interesting thing about the Master Model approach to assembly modelling
    is that every part you create is fixed to a default coordinate system. It's
    bricked in place. Locked in concrete. No movement permitted there. So, what
    I'm thinking is that you must do the parts differently, not with default
    constraints, not with offset to a csys (the kiss of death to motion). Maybe
    you need to set up something else than the defult csys, maybe some points,
    planes and axes!?! I don't really know as I'm not looking over your
    shoulder. But, I do know that the Master Model approach's got you by the
    balls. Breaking free will require deeper investigation into this approach.

    David Janes
     
    David Janes, Dec 16, 2006
    #2
  3. I've found it useful to create a new assembly for mechanisms. Don't
    create any new features in the new assembly, and keep it only for
    merchanisms. It has worked well for me in the past. this way all your
    features can be made to line up, and master model methodolgy can still
    be used.

    Cheers
    Craig
     
    rec . music . makers . percussion . hand-drum, Dec 19, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.