Problem with driveworks

Discussion in 'SolidWorks' started by voodoochile, Mar 5, 2008.

  1. voodoochile

    voodoochile Guest

    I playing around with Driveworksxpress and it seems when I go from
    form>rules an error comes up:

    unhandled exception has occurred in a component in your application. Does
    anyone else have this problem?

    exception from hresult 0x80040154 (regdb_e_classnotreg)

    I have just done a re-install, same problem. Anyone help?
     
    voodoochile, Mar 5, 2008
    #1
  2. voodoochile

    ianyat Guest

    I think for some reason your install of OWC is corrupt - you will need
    to download OWC11 and install it, everything should then be okay.

    This can be obtained from
    http://www.microsoft.com/downloads/...2C-402E-4F72-97A5-E0FD290D4B76&displaylang=en
     
    ianyat, Mar 5, 2008
    #2
  3. voodoochile

    voodoochile Guest

    You're a star! Brilliant it works!


    I think for some reason your install of OWC is corrupt - you will need
    to download OWC11 and install it, everything should then be okay.

    This can be obtained from
    http://www.microsoft.com/downloads/...2C-402E-4F72-97A5-E0FD290D4B76&displaylang=en
     
    voodoochile, Mar 5, 2008
    #3
  4. voodoochile

    ianyat Guest


    No problem.

    By the way there is an entire community full of useful information,
    tutorials, examples and forums at

    www.driveworksxpress.com

    Good luck!!
     
    ianyat, Mar 5, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. (dos_getfiled) problem with acad2000

  2. Problem with a SHX file

  3. Error Problem - Plotting Problem

  4. Problem with collision detection in 2003 with all the service packs

  5. Problems with "cut with surface" when working with "spilt"

  6. Problem with plotting dwgs with stb style

  7. VBA calling .EXE with parameter passing -- problem re-executing with ENTER key

  8. Error Problem - Plotting Problem

Loading...