Problem Printing Hatch

Discussion in 'AutoCAD' started by HJohn, Nov 22, 2004.

  1. HJohn

    HJohn Guest

    I having problems printing hatched drawings. I am using a new HP LaserJet 4250tn, its model is not listed on the HP list and the CD nor the HP web site have a Heidi driver for it. The are two system drivers on the web, one is a PostScrip and the other is a PCL driver. I installed the PCL and configured a PC3 on it using one of the laserjet models from the HP list. Is any one using the printer? Can I get some recommendations about which system driver is better for AutoCAD, PCL or PostScrip?
     
    HJohn, Nov 22, 2004
    #1
  2. HJohn

    jean_michel Guest

    In past experiences, never had problem using the PCL instead of the PostScript.

    Jean-Michel Dufour

    IRISCO DU QUEBEC
    Resseller
     
    jean_michel, Nov 23, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Special Hatch Problem

  2. Hatch problem

  3. Rubble hatch problem

  4. Printing from Virtuoso (or printing GDSII)

  5. Printing Says 11x17 but its printing 8x11

  6. Printing solid hatch as a % fill??

  7. Printing Solid Hatch

Loading...