problem autocad+autosolids

Discussion in 'AutoCAD' started by deekodiver, Oct 19, 2004.

  1. deekodiver

    deekodiver Guest

    I'm using autosolids.
    When I use the funstion quickdraw, i can make perfect 2D-drawings of every
    3Dsolid in the model.
    Saving these drawings as dxf en opening within autocad works without
    problem.

    However , using these dxf-drawings on my lasermachine indicaties me dat all
    lines en circles are mixed up. Using a simple dxf-vieuwer tells me te same.

    Reopening these files in Autocad shows me again perfect drawings. Checking
    properties of every object is OK.


    What could be the problem ??
     
    deekodiver, Oct 19, 2004
    #1
  2. deekodiver

    mataeux Guest

    IT SEEMS LIKE YOUR EXPERIENCING A PROBLEM WE HAVE DISCUSSED BEFORE

    WITHOUT THE COMPLICATED EXPLANATION, HERE IS A QUICK SOLUTION:

    OPEN THE DXF FILE IN AUTOCAD, THEN
    SET THE USER COORDINATE SYSTEM TO THE 'FRONT' PLANE
    (Command "._UCS" "_FRONT")
    MIRROR ALL OFFENDING OBJECTS
    (Command "._MIRROR" "_ALL" "0,0" "1,0")
    SAVE THE DXF FILE NOW

    GOOD LUCK
     
    mataeux, Oct 20, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Error Problem - Plotting Problem

  2. Problem with userdatacache being copied to \Application Data\Autodesk\AutoCAD 2005\R16.1\enu\

  3. Problem with Solidworks Block Attributes vs. AutoCAD Block Attributes

  4. AutoCAD Map 5 (AutoCAD 2000) Dictionary Problem...

  5. Error Problem - Plotting Problem

  6. AutoCAD® 2005, AutoCAD 2006 and AutoCAD 2007 products freezing on launch

Loading...