Pro/E Wildfire dxf generation, solved

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by CHale, Apr 19, 2004.

  1. CHale

    CHale Guest

    I recently asked into this topic and quickly got some great feedback
    that took me to a solution. Below is a summary of how I did this, for
    folks who may not know how to do it:

    In .asm file,
    If there are better ways to go at it, I'd very much like to see it;
    but this did work, at any rate. Thanks again to the helpers--

    Charley Hale
    Lafayette CO
     
    CHale, Apr 19, 2004
    #1
  2. CHale

    David Janes Guest

    : I recently asked into this topic and quickly got some great feedback
    : that took me to a solution. Below is a summary of how I did this, for
    : folks who may not know how to do it:
    :
    : In .asm file,
    : > Reorient View menu; Saved Views; Name: "test", say; Set; Save; OK.
    : > File: New: Drawing; "test.drw", say.
    : > "Empty with Format"; Browse; c.frm (e.g.); OK.
    : > "Insert Drawing View"; Done; click a center point in the drawing area;
    : > Select "test" Saved View; Set; OK.
    : > Save As: "test.dxf"
    : > Open dxf in ACAD14 and proceed with the ACAD work.
    :
    : If there are better ways to go at it, I'd very much like to see it;
    : but this did work, at any rate. Thanks again to the helpers--
    :
    Thanks, Charley, for the summary. Good luck with learning solids modelling.
    Remember, there's a community of users ready to help you if you get stuck.

    DJ
     
    David Janes, Apr 21, 2004
    #2
  3. CHale

    CHale Guest

    I just received my excellent-quality used copy ($85 used!) of Lamit's
    "Pro/Engineer Wildfire" yesterday, and I believe my "client-centered
    therapy" circumstances are well set in place now :) Thanks, and I'll
    keep you posted on my progress in learning this obviously magnificent
    tool.
    Charley

    --I would note <one> glitch in my procedure above; when I bring the
    dxf file up in ACAD14, it's scale is way off (the Pro/E .asm file is
    scaled in millimeters). I find that I have to use the "scale" command
    in ACAD and bring the thing up in size to jibe with, say, inches
    readout, or whatever I want. This involves knowing some specific
    feature's size, measuring the same feature in ACAD, and applying the
    ratio to the scale that results from that. Kind of clunky, to be
    sure, but it does work. Am I missing something simple in my procedure
    above that would result in the dxf coming in right-on in scale?
    thanks--
     
    CHale, Apr 22, 2004
    #3
  4. CHale

    David Janes Guest

    : >
    : --I would note <one> glitch in my procedure above; when I bring the
    : dxf file up in ACAD14, it's scale is way off (the Pro/E .asm file is
    : scaled in millimeters). I find that I have to use the "scale" command
    : in ACAD and bring the thing up in size to jibe with, say, inches
    : readout, or whatever I want. This involves knowing some specific
    : feature's size, measuring the same feature in ACAD, and applying the
    : ratio to the scale that results from that. Kind of clunky, to be
    : sure, but it does work. Am I missing something simple in my procedure
    : above that would result in the dxf coming in right-on in scale?
    : thanks--

    All you probably have to do is make the units agree between the Pro/e
    models/assembly and the ACAD model space. To check what units the Pro/e stuff is
    in, go to 'Info>Model'. At the top, under the name, it shows units. Another way
    you can see and change the system of units is with 'Edit>Setup>Units'. To change
    the units, pick a new system and click 'Set'. Pick 'Covert Existing Numbers (Same
    size)', your model will now measure the same as it did before, but in the new
    system of units, USC or ISO. I'm sure you can do this from the ACAD end, as well.
    Just for the hell of it, you ought to try doing it a few times in Pro/e. You may
    have to do it, not only for the assembly, but for each of the models, as well.
    Good practice. Or get out the conversion tables: 25.4 mm per inch or .03937 inch
    per mm.

    David Janes
     
    David Janes, Apr 23, 2004
    #4
  5. CHale
    You need to have your .drw scaled to full size. Then the drawing is the
    correct size in AutoCad.
    Andrea
     
    Andrea Willans, Apr 23, 2004
    #5
  6. CHale

    CHale Guest

    That's it, thanks to all once again. I find that the default drw
    scale seems to want to be 0.036 (and 1/0.036 is the 27.78x I keep
    wanting to scale my dxf's up by in ACAD...); when I "Change Scale" to
    1.0, all is well when I open it up in ACAD. The scale of the asm I'm
    working with is "mm", and when I open it in ACAD, I read the correct
    dim's in inches, as I want. Very neat.
    Charley
     
    CHale, Apr 23, 2004
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.