Printing round 3D objects

Discussion in 'AutoCAD' started by RC, Dec 22, 2004.

  1. RC

    RC Guest

    We are using acad 2000i , XEROX ST 432, as 11x17 printer.
    Machines Win2000,
    Most our drawings are 3D objects,
    Dispsilh is 1
    In 'hide plot" mode, sometimes round 3D objects/profiles- like tubes etc,
    In layout does not print one edge, or even not at all, but only while this
    printer-as Acad plotter.
    Printing to PDF / JPG or other is fine.
    Any idea how to fix it, sometimes those few missing lines create a problem

    Regards,
    Roman
     
    RC, Dec 22, 2004
    #1
  2. RC

    Matti Pitkänen Guest

    #1 use latest drivers.
    #2 test all alternative modes; PCL, PS, HP-GL/2
    #3 test using other manufactures drivers, you lose perhaps some
    functionality, but
    you may gain proper output. For example our previous Xerox lost
    randomly lines
    at the finishing end of the page, when PS-output was used, and we had
    to go for
    some HP-driver.

    When you find the combination, wich works, use that.

    Matti
     
    Matti Pitkänen, Dec 27, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How does autocad/lisp round numbers?

  2. Insert a round block using any quandrant

  3. ROUND UP A NUMBER.

  4. Round XYZ by decimal precision

  5. Variable Round

  6. Dome and round walls

  7. Fit a sphere to a rather round surface in Pro/E

  8. Measure from round to a flat

Loading...