Printing problems

Discussion in 'AutoCAD' started by Craig Hemington, Jan 19, 2005.

  1. Craig Hemington

    Craig Hemington Guest

    I am printing Autocad 2002 dwgs with jpeg graphics attached, to a Canon
    i6500. The jpeg images are printing in stripes with 3mm gaps. Everything
    else is printing O.K.
    Canon support cannot help and have suggested Autodesk may have some
    suggestions on drivers.
     
    Craig Hemington, Jan 19, 2005
    #1
  2. Craig Hemington

    Craig Hemington Guest

    Dean
    images (jpeg) are inserted using IMAGEATTACH. Reducing the scale has no
    positive effect. Still plotting in strips of 13mm with 2mm gaps, regardless
    of size (scale) of plot.
    Canon support hinted at a problem with Autocad printing in 'raster' or
    'vector' modes?

    Craig
     
    Craig Hemington, Jan 20, 2005
    #2
  3. Craig Hemington

    zabrus Guest

    i've got the same problem... i'm trying to find solution in internet. if you find solution please post here... i'll do the same.
     
    zabrus, Jan 20, 2005
    #3
  4. Craig Hemington

    gabe-google Guest

    gabe-google, Feb 4, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Printing from Virtuoso (or printing GDSII)

  2. dwgeditor 2006 Printing Problems

  3. Problems printing some PDFs created from SolidWorks on HP 5000N

  4. Printing/plotting font rendering problems

  5. AutoCAD Architecture 2008 Printing Problems

  6. AutoCad 2000i Printing problems

  7. printing problems

  8. Printing Says 11x17 but its printing 8x11

Loading...