Printing problem with HP deskjet 600

Discussion in 'AutoCAD' started by Martin Kunsman, Jul 17, 2004.

  1. Martin Kunsman

    Martin Kunsman Guest

    Well heres the story and the problem


    a few months ago my kid got into my old books and found my notes on AutoCAD release 12, and the ensuing manuals from technical school. (I learned how to draw with AutoCAD for blueprints). So he takes an interest in it draws a few pictures.

    Our problem is every time he prints it only prints a partial drawing of the selected drawing even when you look in print preview it shows only a small portion of the drawing.

    Is there a way to set this so his drawing which is scaled 1:1 so it would fit on a piece of 8.5 x 11 piece of paper print on a full sheet and we can get the full drawing. The computer uses windows xp pro with AutoCAD release 14 and the printer driver is most current driver for xp

    Your help would be greatly appreciated
     
    Martin Kunsman, Jul 17, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Printing to Deskjet 1220C with Autocad 98 on XP peer-peer network

  2. HP Deskjet 1220c problem

  3. HP Plotter 550 and HP Deskjet 1220 with Autocad 14.0

  4. Creating PLT files with HP Deskjet 1220c & XP

  5. HP Designjet 600 not optimized with Windows XP & Acad 2000

  6. HP DESKJET 1220C PRINTING PROBLEM

  7. Problems printing Autocad 2002 and ADT 2004 with HP DeskJet 1220c

  8. HP Deskjet Plotting Problem

Loading...