Printing A3 on two A4

Hi
Are there a way to print .dwg files with A3 size on two A4 size
(Splitting drawing to 2 drawings then overlap them manaual)

Omda4wady

 

: Hi
: Are there a way to print .dwg files with A3 size on two A4 size
: (Splitting drawing to 2 drawings then overlap them manaual)
:
: Omda4wady

Yes but you must make sure that you make the scale of both drawings exactly the
same. I have done it with a A0 drawing. First divide the drawing into the two
A4s by using construction lines at the A4 size 297x210 or 210x297 depending on
your layout (landscape or portrait). Make 2 layouts both A4 bring in one
section other the drawing to one and the other section to the other. Make sure
you have a reference point in adjacent corners at the same height for each
layout. You should then be able to plot (Print) and overlap and join. It is a
bit of trial and error until they match properly but it can be done.

 

Make a new layout with to views of size A4. Then position your model
in both viewports as you want it and print them on two sheets

bob.at