Printer probs

Discussion in 'AutoCAD' started by esky, Sep 21, 2004.

  1. esky

    esky Guest

    Hi there,
    I have been trying, for some time now, to get my prints to reflect my .ctb line weight settings. Am using Land Desktop 2005 & XP. Have exhausted all avenues, process of elimination, etc, etc, to no avail. Am printing to a Xerox A3 & HP600 DesignJet. Plots/prints are readable, but not what the setup shows.
    Any answers out there?
    Cheers.
     
    esky, Sep 21, 2004
    #1
  2. esky

    Jon Kirkham Guest

    have you checked to make sure that you are pathed to the correct ctb? It
    sounds obvious, but I had a problem once where we had two folders of ctb's,
    and I was pathing the wrong folder. The names were identical, but the
    settings were different.

    Any answers out there?
     
    Jon Kirkham, Sep 21, 2004
    #2
  3. esky

    John Schmidt Guest

    Dou you have your plotters set to "software control"? It sounds like you're
    overriding that with a hardware palette at the plotters instead.

    John

    line weight settings. Am using Land Desktop 2005 & XP. Have exhausted all
    avenues, process of elimination, etc, etc, to no avail. Am printing to a
    Xerox A3 & HP600 DesignJet. Plots/prints are readable, but not what the
    setup shows.
     
    John Schmidt, Sep 21, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Changing Printer Support File Path via Lisp

  2. Can't enter printer name in macro

  3. Calling Bextend from Lisp (Extend Probs)

  4. Change printer to user.

  5. Joining probs again

  6. Mate probs

  7. Old probs still around and a new one appeared with 2009 sp1

  8. Printing probs

Loading...