Print of rolled back part?

Discussion in 'SolidWorks' started by dlevy, Mar 16, 2005.

  1. dlevy

    dlevy Guest

    I would like to make prints of rolled back versions of a part. This would
    allow me to give the machine shop prints in the sequence of manufacture.

    Is this possible?
     
    dlevy, Mar 16, 2005
    #1
  2. dlevy

    PeterJelliffe Guest

    I think you'd have to make separate configurations for each step, and
    then supress all the features you don't want to show. SW doesnt seem
    to like rollbacks in drawings or assemblies.
     
    PeterJelliffe, Mar 16, 2005
    #2
  3. dlevy

    pete Guest

    If you download Tubosnap, (FREE), you can capture the whole screen or just
    one window.
    This is what I use nad it works very well.
    This is one way around your problem :)
     
    pete, Mar 16, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Print part of a drawing?

  2. Print from part/asm 100% tip

  3. Export/print high quality image of Assembly or Part

  4. SAVE ROLLED BACK-How to tell whether??????

  5. SW2009 - print scale 100% from part/assy : GONE!

  6. Hot rolled steel profile catalogue

  7. Print Manager to batch print DWF files to windpws printer

Loading...