Print driver PROBLEM ??

Discussion in 'Microstation' started by Randy Hislop, Jun 24, 2004.

  1. Randy Hislop

    Randy Hislop Guest

    Microstation J, winXP OS, Winserver2003 print server...
    Created queue for the HP DesignJet550, if properties such as paper size,
    colour, etc. are preset on the server queue, then the user selects one of
    the preset selections, all Fonts are plotted thicker as are all lines.

    If, however, the user selects the appropriate plotter, then ignores the
    preset selections and sets the properties himself prior to each plot, the
    line weights are all correct. Even though he selects exactly the same
    settings as were set by the administrator on the queue.

    What gives?
    Randy
     
    Randy Hislop, Jun 24, 2004
    #1
  2. Randy Hislop

    Field Guy Guest

    An easy answer is to send the plots directly to the plotter in the driver
    (default_outfile=\\server\printer - or something similar). If this works,
    the user just has to pick that driver.
     
    Field Guy, Jul 1, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Print Layout LISP/Active X Problem

  2. OCEAN print problem

  3. Edrawings exit on print (bug/problem)

  4. need ADI driver for v.2002 or ploter driver

  5. ADT-04 HP driver.. This driver is not digitally signed

  6. Print Manager to batch print DWF files to windpws printer

  7. Oce Driver Problem?

  8. need ADI driver for v.2002 or a special plotter driver

Loading...