Preview & Printing Different than Screen Display

Discussion in 'AutoCAD' started by DChiabaudo, Jul 21, 2004.

  1. DChiabaudo

    DChiabaudo Guest

    I am setting up CAD standards for the office and I'm having trouble. I xref'ed a drawing into model space on (0) layer which is on and set to plot. In paper space I opened two viewports. Each viewport shows the same model space drawing only with different active layers. When I preview and plot, large parts of the drawings are missing (walls in one viewport, fixtures in the other). The files aren't that big.

    Thanks in advance for your help in preventing me from going crazy!
     
    DChiabaudo, Jul 21, 2004
    #1
  2. DChiabaudo

    wfb Guest

    Check for blocks, etc located on defpoints layer.


    | I am setting up CAD standards for the office and I'm having trouble. I
    xref'ed a drawing into model space on (0) layer which is on and set to plot.
    In paper space I opened two viewports. Each viewport shows the same model
    space drawing only with different active layers. When I preview and plot,
    large parts of the drawings are missing (walls in one viewport, fixtures in
    the other). The files aren't that big.
    |
    | Thanks in advance for your help in preventing me from going crazy!
     
    wfb, Jul 22, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.