Power Spectral Density

Discussion in 'SolidWorks' started by cuenca1979, Feb 12, 2007.

  1. cuenca1979

    cuenca1979 Guest

    Hi all, I am new to the group. I have a problem trying to run an
    static study using a solid mesh and p elements. I have no errors
    assigning materials, restraints, forces and defining the adaptive
    parameters. Meshing the model is also ok but as soon as I hit run
    study I get this error:

    "Can not open file containing Power Spectral Density *.psd"

    The Cosmosworks help doesn't have anything related to this.

    I'd appreciate any help regarding what this error means and how to
    solve it.

    Thank you.
     
    cuenca1979, Feb 12, 2007
    #1
  2. cuenca1979

    TOP Guest

    This looks like a throwback to Cosmos/M. Something is wrong if it is
    asking for this on a static analysis.
     
    TOP, Feb 13, 2007
    #2
  3. cuenca1979

    cuenca1979 Guest

    I actually found that there's an SPR for this: SPR #358538
     
    cuenca1979, Feb 14, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to solve layout Minimum Density Area across chip / CHIP Area must be >= 14%

  2. TLF Power Modelling & Power Simulation

  3. Analog power / Analog clean power?

  4. TSMC 025 minimum density of a CTM area design rule.

  5. Assura question on density checking

  6. How can I check pattern density by Diva?

  7. soc encounter keeps increasing the density

  8. DRC ERROR "minimum density"

Loading...