Polar Tracking Error

Discussion in 'AutoCAD' started by Norm Delay, Oct 28, 2004.

  1. Norm Delay

    Norm Delay Guest

    Using polar tracking with the object snap tracking to start a new line or
    other object I
    am having the following problem. When I set the polar tracking option to
    "track orthogonally" it works just
    fine. When I turn try to use the "any angle" option, it tracks from the last
    point that I picked on screen not the otrack point. I have double checked
    all the settings that I
    can think of and nothing seems to correct the problem.

    Please help, I need to get this resolved.

    Norm
     
    Norm Delay, Oct 28, 2004
    #1
  2. Norm Delay

    chrisb Guest

    And you're not hitting Enter before picking your starting point, right? (which starts your line from the LASTPOINT value, regardless of OTRACK and POLAR settings).
     
    chrisb, Nov 5, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Polar Lisp Help...

  2. Polar System Variable

  3. ortho/polar tracking setting in lsp

  4. Setting polar tracking additional angles via custom button

  5. ortho or polar tracking angle

  6. Object Snap & Polar Tracking as a single command?

  7. polar tracking incriments

  8. Question about Polar tracking

Loading...