PMP & pc3 files...

Discussion in 'AutoCAD' started by kusa24, Apr 8, 2004.

  1. kusa24

    kusa24 Guest

    I am getting the usual "unexpected null pointer" error.I have searched through the forums and the one thing I keep seeing is to "make sure the pmp and pc3 files are compatible"

    How do I do this? How can I check to see if they are compatible?
     
    kusa24, Apr 8, 2004
    #1
  2. Trye going to the AutoCAD File->Plotter Manager and then double click on the
    pc3 file you are having problems with. Then make a few changes and try
    resaving it. If that doesn't work then you probably have to create a new
    one using the Add-A-Plotter wizard there. There is a ton of info stored in
    these so you can't just copy them form other machines and usually if you
    upgrade AutoCAD you have to recreate them for the new version. IT could be
    that a plotter was moved on the network so the file no longer points to the
    same name or one of several things.

    --
    Rodney McManamy
    President
    CADzation
    -------------------------

    -------------------------
    518 South Route 31 Suite 200
    McHenry, IL 60050
    www.cadzation.com
    Providing Industrial Strength
    PDF & DWF Solutions to the
    Global CAD Marketplace.

    through the forums and the one thing I keep seeing is to "make sure the pmp
    and pc3 files are compatible"
     
    Rodney McManamy - CADzation, Apr 8, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.