Plotting using SRR files

Discussion in 'AutoCAD' started by Damo, Apr 5, 2005.

  1. Damo

    Damo Guest

    Hi everybody,
    At the company where i just started they use SCR files, run through ScriptPro, to batch plot files. The reason they use this approach is that they need to switch on/off, change colours etc of certain layers and then leave the drawing as it was.
    We're using Ak2005 and the problem they are experiencing is this: when the script file is run on an individual file it works fine however when it's run over a batch of files it fails!!

    Any ideas anybody??

    Thanks,

    Damo.
     
    Damo, Apr 5, 2005
    #1
  2. Damo

    Big 'D' Guest

    Maybe you can stop the process sometime after the second file has printed and take a look at what it is doing different (F2). This may help you find where the breakdown is. It could be as simple as a missing return in the script.

    D
     
    Big 'D', Apr 5, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lines disappear when plotting - Thread from Printing-Plotting Discussion

  2. Problem zipping files using arj32.exe using shell command

  3. SRR available yet?

  4. Plotting multiple pdfs using custom Acrobat distiller.pc3 file

  5. PLOTTING DWG VS. PLOTTING DWF

  6. PLotting using <none>

  7. Batch Plotting Using Plotter Overrides from the SSM sending 1 single job to Oce9600.

  8. 2005 plotting disables ADT3.3 plotting

Loading...