Plotting using a macro

Discussion in 'AutoCAD' started by dmck, Apr 5, 2005.

  1. dmck

    dmck Guest

    Hi,
    I'm currently running AutoCAD 2004 with a HPDJ550 A0 Colour plotter and HP LaserJet 5110. I have quick plot buttons set up that invoke a script to import page setups from a separate drawing held on the network. and print the current drawing. eg A1 MONO LANDSCAPE OTO

    However only the A1 plot button works. All the rest plot with a very large off set only giving me the top right hand quarter of the drawing. If i run through the command line and invoke the page setup the drawing prints fine. I have checked all my settings and to my knowledge they are correct. I have seen other posts regarding this issue but none have been resolved. This has been an ongoing problem. Any Idea's?
     
    dmck, Apr 5, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lines disappear when plotting - Thread from Printing-Plotting Discussion

  2. How to set "level name" in Select By Att dialog using macro cmd?

  3. Run a Macro using HotKeys????

  4. Run a Macro using HotKeys????

  5. Call a macro from another macro?

  6. Macro to rerun a macro

  7. How to find a "dirty flag" in a drawing when using bulk convert macro?

  8. Is it possible to run a macro file from another macro file?

Loading...