Plotting over network - help!

Discussion in 'AutoCAD' started by Matt Forsyth, Apr 15, 2004.

  1. Matt Forsyth

    Matt Forsyth Guest

    Hello

    I have a problem in our office where we have many terminals plotting
    to a single HP plotter.

    There is one infernal machine that plots to this plotter, however the
    line weights and quality is far below that of other machines when they
    plot exactly the same file.

    We are using autocad 2004, and the plot tables are the same on each
    machine. I originally thought that the nozzles on the plotter were
    clogged up, but this is not the case as the plots from the other
    machines are so good.

    Are there any settings which may reside on one machine as opposed to
    the others which could result in a lousy quality?

    Thanks in advance

    Matt
     
    Matt Forsyth, Apr 15, 2004
    #1
  2. Matt Forsyth

    Paul Turvill Guest

    Are you certain that the bad machine is using the same plotter *driver* as
    the others?
    ___
     
    Paul Turvill, Apr 15, 2004
    #2
  3. Matt Forsyth

    gruhn Guest

    We are using autocad 2004, and the plot tables are the same on each

    Also check the custom properties. That machine may be set to plotting on
    different media or any of a number of other little switches.
     
    gruhn, Apr 15, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rebuilding... Over & over &over &over...

  2. It Ain't Over Till It's Over

  3. AutoCad slow commands over network.

  4. Install fonts globally over network?

  5. Install Stand-alone over a network?

  6. Problems plotting text and lines over raster image

  7. Revision Clounds in Paperspace plotting over Model linework.

  8. Screening over a network

Loading...