Plotting on thick media/new plotter advice

Discussion in 'AutoCAD' started by robert w., Jan 13, 2005.

  1. robert w.

    robert w. Guest

    Hi all,
    Our company is shopping for its first A1 sized plotter and we have a special
    feature request.
    I'd like to be able to plot directly onto .033in (.83mm) thick paper board
    for model/template purposes. We've been printing on standard paper then
    spraymounting onto the thicker board. This has worked fine for the letter
    and legal sized prints we've been using for this, but 24x36 is going to be
    tedious at best.
    The tightest radius the board can bend to is 1.75" (with the grain).

    In a nutshell: I'm looking for a wide format printer with the following:
    Monochrome
    24" wide
    roll feed
    autocut
    Output volume will never exceed 20 or 30 prints/week, average output will be
    around 10 prints/week
    Must be ethernet ready/friendly
    printing cad dwgs almost exclusively, occaisional raster printing.
    $2000 is our ceiling, approx.

    If anyone can recommend a printer we'd be greatly appreciative.
     
    robert w., Jan 13, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.