plot to the same directory where the dwg is

Discussion in 'AutoCAD' started by matthew, May 2, 2005.

  1. matthew

    matthew Guest

    Hi, with autocad 2002 I used an autolisp that works no longer with
    autocad 2006: it sets up the plt output directory to be the same as
    the dwg currently opened.
    Can you help me?

    Do you know of any working solution?

    Thanks


    http://new.cadalyst.com/newsline/issue.cfm?issue=200034

    14. TIP: ROUTINES RESET AUTOCAD PATHS TO THE CURRENT DIRECTORY
    Leland Leahy sent in this routine for resetting all paths in AutoCAD
    to
    the current directory:

    (defun e:acadregdialog_set (k$ e$ v$); key entry value
    (vl-registry-write (strcat

    "HKEY_CURRENT_USER\\Software\\Autodesk\\Autocad\\R15.0\\ACAD-1:409\\Profiles\\"

    (getvar "CPROFILE") "\\Dialogs\\" k$) e$
    v$)
    ); end defun

    The following loads every time a drawing opens:

    ;add standard settings below
    (e:acadregdialog_set "OpenSaveAnavDialogs" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "Select File" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "Create Slide File" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "Enter Name Of File To Overlay"
    "InitialDirectory"
    (getvar "DWGPREFIX"))
    (e:acadregdialog_set "ExportLayerStatesFileDialog" "InitialDirectory"
    (getvar "DWGPREFIX"))
    (e:acadregdialog_set "PublishToWeb" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "PublishToWebDirectory" "InitialDirectory"
    (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "Save Drawing As" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "Select A File" "InitialDirectory" (getvar
    "DWGPREFIX"))
    (e:acadregdialog_set "SelectDrawingFileBlkDlg" "InitialDirectory"
    (getvar
    "DWGPREFIX"))
     
    matthew, May 2, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Plot to file directory

  2. Nee library DWG of 700+ block directory

  3. a pulldown to open a file directory to OPEN a dwg, not insert

  4. insert block or note into all sheets of a dwg in the same location?

  5. Various Rendered Plot Scenes All come out as the same When Plotted

  6. Same Settings, Same Printer, Different Results

  7. plot to the same directory where the dwg is

Loading...