plot area = "limits" on layout tab

Discussion in 'AutoCAD' started by lars, Nov 30, 2004.

  1. lars

    lars Guest

    Everyone else in the office has the option, under plot settings, plot area, to select and use "LIMITS" to plot to from a layout tab.
    I don't, and they say I'm weird. . . All I have is Layout, Extents, Display and Window
    Does anyone know why?
    Thanks.
     
    lars, Nov 30, 2004
    #1
  2. lars

    ctc11 Guest

    The option "limits" should replace "layout" when one plots from model space. Are you sure they aren't looking at the plot dialogue box when accessed from model space?
     
    ctc11, Nov 30, 2004
    #2
  3. lars

    Sundance Guest

    The solution to your problem is found in "Options". Simply invoke the Options dialog box, select the Display tab, and deselect all check boxes, except "Display Layout and Model tabs". Finally, select OK to exit Options.

    When you plot a layout, Limits will be an option, instead of Layout.

    All this is applicable unless, of course, you are running 2005 and having problems with the plot dialog box like I currently am.

    I wish you success in solving your problem. If this does not resolve your issue, e-mail me @ .
     
    Sundance, Dec 9, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Opening Autocad drawing with a specific layout tab active.

  2. ID layout tab name

  3. set plot area to layout in page setup

  4. Next Layout Tab in Script File

  5. How to solve layout Minimum Density Area across chip / CHIP Area must be >= 14%

  6. understanding model tab vs. layout tab

  7. Layout Tab for each sheet or one layout tab for all sheets

Loading...