PC3 and LPR Ports

Discussion in 'AutoCAD' started by jhernadez, Dec 16, 2004.

  1. jhernadez

    jhernadez Guest

    We have a Windows 2000 workstation setup as our print server and then use LPR to print to this print server so that we don't use up the 10 concurrent users for sharing. Hence, why we don't use UNC or shared printing.

    The problem I have is when setting up a PC3 on a local machine, I am not seeing any of the LPR ports in the list of available ports. I know the port is on the local machine, because the Windows printer is using this port. I have tried selecting the option "Show all Ports".

    There is the option to "Browse Network", but I would have to assume going over UNC would take up a connection to my print server that is really a workstation. So that isn't going to work, because I have more than 10 users in the office.

    Any insight is greatly appreciated.

    Thanks
     
    jhernadez, Dec 16, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Registers can not drive analog ports directly

  2. Creating a custom resistor from single metal layer in Cadence for transmission line ports

  3. Impedance setting for ports in Spectre Simulations

  4. Calibre question: why initial ports before transformation differ from netlist IO subckt ports

  5. ATI FireGL V3100 + (2) SLI Ports

  6. paper space and view ports

  7. How to set up Plot files and line scale for different view ports?

  8. LPR vs. IP

Loading...