Pattern Extrude

Discussion in 'SolidWorks' started by Dames, Dec 22, 2004.

  1. Dames

    Dames Guest

    Is it possible to oattern an Extude in a part EG: If you had a 200 x
    200mm Extude with a thickness of 1mm and the extrude was 5000mm long
    and you had you wanted to cut the Extude into 5 seperate solid. Can you
    place a cut across 1 face then pattern that cut 5 times.
     
    Dames, Dec 22, 2004
    #1
  2. Dames

    McBrian Guest

    No but you can pattern the cut extrude sketch 4 times. When you do the
    cut extrude SW will prompt you which bodies to keep (selected or all).
    The sketch pattern can be edited later is desired.
     
    McBrian, Dec 22, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LISP extrude along path

  2. Get Extrude Length in 3D Solids

  3. [LISP] Extrude problem

  4. Extrude to spline...

  5. Al Cast Mold and Pattern is currently seeking a CNC Programmer/Machinist - Mold and Pattern Maker.

  6. Al Cast Mold and Pattern is currently seeking a CNC Programmer/Machinist - Mold and Pattern Maker.

Loading...