Part/Assembly tangent edge display is resetting after...

Here's a new one:

Just upgraded to 2007 sp2.0 from 2006 sp4.0. Part/Assembly tangent edge
display is resetting after opening/editing a drawing. I set the tangent
edge display to "removed" and it keeps switching to "as Visible" after
being in a drawing. Another crazy thing is that the lines shown are
show "as Phantom". Tried this with existing and new parts same result.

Can someone else try this:
-Open System Options
-Select Display/Selection
-Set tangent edge was changed to "Removed"
-Create a new part (a cylinder)
-Ssave
-Make new drawing
-drag views into drawing
-Open System Options
-Select Display/Selection
-is tangent edge changed to "as Visible"?

Thanks,
DT

 

Yes, good catch. I see that too.

You've reported this somewhere other than the newsgroup, right?

By the way, how can you stand working with tangent edges removed? That
drives me nuts! I work with phantom tangent edges.

 

Yes, I reported it to our VAR.

I usually have the phantom tangent edges turned on but I'm working with
some Bosch Aluminum framing (very cool stuff, engineers erector set,
http://www13.boschrexroth-us.com/framing_shop/) with losts of radii and
all the lines were drive me crazy!

 

Not on mine SW2007 SP2.0. I just tried it and it's still on Removed. I've
never noticed that one turning itself on.

I did figure out a clue though in that it appears to be a function of the
setting for Tools/Options/Drawings/Display Style in that I have mine set to
Tangent edges in new views Removed. If I change that setting to Visible or
Use font, I see what you are seeing.

WT

 

It looks like the problem has to do with the new "View Palette" when
creating a new drawing. If I create a part then go, file new, drawing
nothing gets changed.