Paper Space Printing Problem

Discussion in 'AutoCAD' started by KeithD, Mar 23, 2007.

  1. KeithD

    KeithD Guest

    This is a new problem in a file that previously printed fine.

    Problem: Only one viewport (of 3) prints when printing from
    paperspace. Title block and annotations also do not print. If i
    erase all viewports title block and annotations print.

    Drawing Setup:
    Model Space
    (3) large civil and landscape files xrefed into architectural site
    plan plus standard entities drawing misc details.

    PaperSpace
    Scaled PS viewport for the plans plus (2) additional scaled PS
    viewports of the details. Title blocked xrefed and annotation
    added.

    I have checked (many many times) the layer configurations - the proper
    layers are on/thawed and set to print. Issue still occurs if
    everything in the whole drawing is moved onto layer 0.

    Shade mode is set to 2D wire frame.
     
    KeithD, Mar 23, 2007
    #1
  2. KeithD

    Ranger Guest

    You said that the files x-ref'd in were large so you could be
    experiencing the problem due to the file being too large for the
    computer to handle, might need to add memory or upgrade processor?
     
    Ranger, Mar 24, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Modify block in paper space will in model space

  2. Dimension in Paper Space with Points from Model Space

  3. Get a Point of a Model Space Object from Paper space

  4. paper space to model space question

  5. How do you scale dashed lines in model space to show up in paper space?

  6. AutoCAD - Hatching in Model Space not displayed in Paper Space and not printing.

Loading...