Palette feature question

Discussion in 'SolidWorks' started by Brian B, Feb 12, 2004.

  1. Brian B

    Brian B Guest

    I have a flat part with a 0.156" perf'd hole pattern and when I insert a
    Palette Feature/Embossment the Embossment appears solid. Is there in way to
    create or show the perf'd pattern being formed with the embossment?
     
    Brian B, Feb 12, 2004
    #1
  2. What happens if you move the Embossment in front of the hole pattern in the
    feature manager?

    Jerry Steiger
    Tripod Data Systems
     
    Jerry Steiger, Feb 13, 2004
    #2
  3. Brian B

    matt Guest

    (Brian B) wrote in
    In order for the Forming Tools to work, you have to have a sheetmetal part.
    If you just convert the part to sheetmetal, then drop the forming tool onto
    it, it should do what you want, assuming the forming tool is set up right.

    For more help, look in the Help for sheet metal and forming tools.

    matt
     
    matt, Feb 13, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.