Pads

Discussion in 'Cadence' started by mariam_telnet, Dec 21, 2007.

  1. mariam_telnet

    mariam_telnet Guest

    Hi to all,

    Can any person help me what is the reason to choose the pads of any
    circuit?

    Thanks to all.
     
    mariam_telnet, Dec 21, 2007
    #1
  2. mariam_telnet

    JD Guest

    Are you taking about the bonding pad? Bonding wire is to connect the
    pin on die to the pin on package. The bonding pad is a pad on die so
    you can bond your wire to the die.

    JD
     
    JD, Dec 21, 2007
    #2
  3. mariam_telnet

    Mobil Guest

    And pads for on-wafer probing to measure the circuit. There are two
    types: 1. The pads for DC probe; 2. The pads for analog or RF probes,
    this kind of pads should contain the ground besides, such as G-S-G
    pads (ground-signal-ground).
     
    Mobil, Dec 24, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PADS to OrCAD to PADS

  2. mosis pads in cadence

  3. IO Pads

  4. What is the common strategy to do RF simulation and measurement with pads?

  5. Extra routing room by suppressing pads

  6. PADS/ESD cells in TSMC & UMC 0.18u kits?

  7. Importing PADS dxf into ProE2001

Loading...