OLE path extraction

Discussion in 'SolidWorks' started by Eric, Feb 12, 2004.

  1. Eric

    Eric Guest

    Hi,
    New here.. Looking extract the path from any OLE linked objects in .drw mode
    I can get data and settings but no path as a string. Any ideas?

    Thanks,
    Eric
     
    Eric, Feb 12, 2004
    #1
  2. Eric

    Jim Sculley Guest

    A cursory examination seems to indicate that it isn't possible. I even
    looked at the COleItem description at MSDN but didn't see any obvious
    stuff there either.
     
    Jim Sculley, Feb 13, 2004
    #2
  3. Eric

    rocheey Guest

    Looking extract the path from any OLE linked objects in .drw mode
    Sounds like you're already looking at the IStream data. I did a quick
    and dirty under sw03, dropping a bitmap into a drawing. I peeked in
    the IStream data and saw pretty much the same, just data.

    But if i chose to *link* an OLE object, the path did show up ...
    which, I guess, makes sense.
     
    rocheey, Feb 13, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Disable OLE update prior to open

  2. Whats the process for figuring found path of xref when xref has no path?

  3. Please help me! strange thing: Cadence ICFB extraction vs. spectre netlist extraction?

  4. Path extraction using Assura RCX

  5. Path or stitched path selection

  6. Sweep with path vs Extrude with path

  7. UNC path and absolute path

  8. Changing an xref path - the whole path??

Loading...