OLE Image Paste onto Sketch Plane?

Discussion in 'SolidWorks' started by Bert, Jul 30, 2003.

  1. Bert

    Bert Guest

    I know you can insert a picture (jpg, tif, bmp, wmf) onto a sketch
    plane, but how do you make an OLE image paste attach itself to the
    sketch plane. When I do a copy and paste from my Corel it paste
    beautifully, but it will not attach itself to anything. Any
    suggestion? I trying to do a fast product label without having to
    work with decals and PhotoWorks.
     
    Bert, Jul 30, 2003
    #1
  2. Bert

    Joel Moore Guest

    (Bert) wrote in
    Not sure what you mean by "attach itself". Are you trying to wrap or
    project it onto a non-planar surface? That won't work.
     
    Joel Moore, Jul 30, 2003
    #2
  3. Bert

    Tony O'Hara Guest

    I think Bert means that, that if you insert a picture and then rotate the
    view, the picture stays face on to the screen and does not rotate.

    What should happen, is that the pic should move and rotate with the surface
    it is inserted on and it should be able to be attached with dimensions.
     
    Tony O'Hara, Jul 30, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. copy & paste pulldown image

  2. 2004 Insert Sketch Snaps View Normal to Plane

  3. Basic Question copying from plane to plane

  4. Changing plane orientation and dissolving text in a sketch

  5. How to copy a point onto another plane while aligning with the original point?

  6. Dependent Sketch in new plane

  7. Starting an extrude offset from the sketch plane?

Loading...