Offsetting Elevated Polyline

Discussion in 'AutoCAD' started by MRuss, Sep 14, 2004.

  1. MRuss

    MRuss Guest

    Using AutoCAD 2004, when I offset an Polyline that has and elevation
    other than 0, the created polyline is put at elevation 0. Why is it
    doing this? It works this way in some files of mine, but in most it
    offsets Polylines in the same elevation as the source Polyline.
    Please HHHHEEEELLLLPPPP!!!!

    Thanks,
    Mike
     
    MRuss, Sep 14, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw a perpendicular from a point on the nearest segment of a polyline

  2. Finding a closed polyline within a closed polyline

  3. offsetting splines /sketch properties interogation

  4. offsetting of splines 2006sp5

  5. offsetting one part in another part

  6. Problem with polyline.GetBulge, why does it fail on my LW Polyline?

  7. calculate the Length off a polyline from begin till a point at the polyline VBA

  8. Polyline inside and tangent to polyline

Loading...