Objectdcl.com Help needed if possible

Hy all !.

In my workplace I can't access Internet Explorer so I can't go to some
sites people here recomend.Only got access to the Forum.I've read here a
post about a program called "ObjectDcl".
www.objectdcl.com This is the site that has that program.
My question is "if" the file is not "too" big, if some "kind" person
could downloaded and post here so I could get it too.
If it's "legally" possible here and not too big the file I would thank a
lot !

Cheers !

Vxc

 

Sorry, I downloaded and attached the wrong file. There are many options for
the ObjectDcl and I don't really know what you want. As long as I know what
you need I will be happy to download and forward to you. Have you tried
sending an e-mail to the webmaster? he might be able to better meet your
needs! here's the address


Mac.

 

Thanks Mac. Sorry for the bother, but I believe that you gave me the
wrong program.The one I read here "DCL Files C++" by sdpurkey on 11-02-2005
was about a software that has the capability to build DCL Windows easier.
Maybe is somewhere on the same site.
Sorry for this post kind of "Thanks but no thanks".
If is not too much to ask if it's possible to get me that one I would
really apreciate.

Thanks again for the bother Mac !!

 

I can although I can access the forum's I believe I can't use e-mail...
or better not too because if the bosses found out they will cut my
"connection"... Yeah is this great working here !. Thanks again for the
support. I will see this at home. Because I was so excited about this new
"gadget" I asked here if someone could put it available.
Sorry about all the bother, Thank you very much Mac !!

Vxc

 

Vxc,

I looked at the download page again and found:
http://www.objectdcl.com/ObjectDCL.zip
It is a 4.1meg file zipped demo version and I think is too big to be posted
to the group.
Do you have access to the customer files forum? I think the moderators allow
large file uploads to that group. If Anne, Tracy or anyone of the other
moderators sees this maybe they can point us both in the right direction. I
have downloaded it ready to post if it's what you require.

Sorry for the earlier confusion!

Regards,
Mac.

 

Below are the links to the Customer Files Forum.

However, I think (personally) you should check with Chad
at objectDCL before posting the demo zip file on these forums
for download.



The File Attachments discussion group can be accessed in
either of the following ways:

By NNTP discussion group reader at
news://discussion.autodesk.com/autodesk.autocad.customer-files

By HTTP (web-based) interface at
http://discussion.autodesk.com/forum.jspa?forumID=126

 

Jason,
You are absolutely right, courtesy would dictate that I check first. I
automatically and (quite rudely) assumed as it was a demo the author would
be happy to get a potential sale. I will e-mail him and find out. Thank you
for the reminder that courtesy costs us nothing.

regards,
Mac.

 

While we are on the subject of contacting Chad....

Chad, did you get my emails on the bugs where the odc file saves super slow when certain activex controls are used?
Also, the selection abilities in the ODCL editor are acting odd.
I'd like to smoothe these things out (even if you need us to pay extra) and maybe this communication on the NG will get
more people involved in ODCL...
thanks

"Mac" <>
|>
|>>
|>> However, I think (personally) you should check with Chad
|>> at objectDCL before posting the demo zip file on these forums
|>> for download.
|>

James Maeding
jmaeding at hunsaker dot com
Civil Engineer/Programmer

 

1/22/04, looks like yours is more recent.
I would like to get it. Do you have the enterprise version?
I have the highest one that does not provide the C code.
I need to clear this with Chad as there may be a good reason I don't have that.
thx for mentioning your info, looks like I need an update.

"Luis Esquivel" <>
|>Jim,
|>
|>What is the date for your objectdcl.exe? it is: 2/10/2004 1:13 PM
|>
|>Mine is dated: 2/14/2005 9:01AM

James Maeding
jmaeding at hunsaker dot com
Civil Engineer/Programmer

 

With permission from Chad I am posting the file to the customer files area.
Be warned it is 4.1 meg zipped.

Regards,
Mac.

 

Well I just tried to upload the file and it seems like it is too large for
the customer files area. Sorry, don't know what to do next!

regards,
Mac.

 

Thank you all again for the effort !!

Vxc

 

From the discussion group guidelines at http://discussion.autodesk.com/ground.jspa

Attachments
All Autodesk Discussion Groups allow attachments. Some file types are restricted. You are allowed only one attachment per post. We encourage you to make your attachments as small as possible, and enforce a 1 MB limit.

Although Autodesk monitors discussion group messages, we do not scan file attachments for viruses or otherwise check or test the quality of these files. You download these files at your own risk. Autodesk does not and cannot warrant the performance or results you may obtain by saving and opening these files and is not responsible for viruses or other risks involved with your use of the file attachments.

 

File deleted as you requested offline.

 

Thank you Anne.

Regards,
Mac.

 

Hi, can you email us your email address and I can email you the install. If the install file is too large, I can send the files individually as well

Thanks Chad Wanless

 

Hi Anne,

Just thought I'd let you know the message is still readable. Also, you said
in pn.cadmanager that the entire CAD humour thread was deleted, it is still
there. In both cases I am accessing through Outlook and not the web.

Just thought I better let you know in case something isn't working like it
should be. On the other hand, maybe we have special privileges in England
which is why we can still read them!

Regards,
Mac.

 

The CAD Humor topic IS removed from the server. You are still
seeing it because you have it in your newsgroup reader cache.
Clear the cache and it will be gone.

This is what your removed post looks like in live view of the
discussion group. Thanks for the note though and no, no special
dispensation for the UK <G>
---
Anne Brown
Discussion Groups Administrator
Autodesk, Inc.

Error!

newsgroup server responded: no such article number in this group

Perhaps the article has expired

<4210b245_3@newsprd01> (173091)

Click here to remove all expired articles