Nvidia card display problems

Discussion in 'AutoCAD' started by Fred, Mar 28, 2006.

  1. Fred

    Fred Guest

    I own a Nvidia Quadro 750XGL While running Acad2004 w/ two Samsung
    Syncmaster 213t Monitors on a Dell Dimension 4600. The problem I'm having is
    when inerting blocks or copy w/ multiple option the dispalyed geometry that
    I'm copying or inserting is jumpy and "sticks" as I move the cursor across
    the screen. I have the 77.56 driver installed for the video
    card...TIA...Fred
     
    Fred, Mar 28, 2006
    #1
  2. Fred

    user Guest

    What does it take to connect two monitors to that card? Does
    resolution have to be lowered?
     
    user, Mar 29, 2006
    #2
  3. Fred

    Tim S Guest

    You are running a very old driver for that card. I have the same card (with
    one screen) and have no problems.
    Update to the latest driver and see if it helps.
    --
    Tim Skene


    PRO Menu - The Productivity Toolbox for AutoCAD
    www.multicim.com/pmenu.html
     
    Tim S, Mar 29, 2006
    #3
  4. Fred

    Fred Guest

    NO..as far as I am aware....

     
    Fred, Mar 29, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. gneral interest-new nvidia card FX3000

  2. Anyone use softquadro on a nvidia geforce4 440 go card

  3. Video Card Comparison nVidia FX500 vs 750xgl

  4. Video Card Question - Nvidia - SW tested cards and drivers

  5. Nvidia Quadro FX 1000 Vid card FS

  6. Nvidia NVS 280 Graphic card

  7. Nvidia Go5700 display problems on HP Laptop

  8. video card Nvidia Quadro Fx 350

Loading...