Note in drawing & reference to subassembly instead of part

Discussion in 'SolidWorks' started by Brian Mears, Nov 10, 2004.

  1. Brian Mears

    Brian Mears Guest

    I've got a drawing view of an assembly which contains subassemblies. I have
    a note w/ leader that I would like to use to call out one of the
    subassemblies, but it only will reference the part it's touching.

    Is there a way to tell the note to reference the subassembly instead of the
    part? Thanks,

    Brian
     
    Brian Mears, Nov 10, 2004
    #1
  2. Brian Mears

    CS Guest

    maybe add an assembly sketch with just a point or a line. Attach the leader
    to the sketch line and then hide the sketch. It should reference the
    sub-assembly then.

    Corey
     
    CS, Nov 10, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to hide part's datums of subassembly in main assembly?

  2. Assigning weight in a subassembly

  3. subassembly and cosmos motion

  4. How can I delete this external reference (mirrored part using plane of another part)

  5. balloons not following subassembly condition - swx2005sp5

  6. Select subassembly macro

  7. change part reference in drawing

  8. is there ways to move the paper instead of the drawing in the layout format?

Loading...