Nested Configurations

Discussion in 'SolidWorks' started by Readuff, Sep 2, 2005.

  1. Readuff

    Readuff Guest

    I have come across configurations - nested 3 deep in an assembly and
    can only get each configuration to resolve to the current
    configuration....(I have 63 configurations) and the only way I have
    found to get them resolved is to open each configuration (3 deep) with
    the main assembly open and update one at a time, to the current
    configuration. Any ideas on resolving this?
     
    Readuff, Sep 2, 2005
    #1
  2. Readuff

    TOP Guest

    A few questions:

    1. Are these assembly configurations or part configurations?
    2. Do you mean derived configurations?
    3. If you mean part configurations, are you using several
    configurations of the same part in the same level of the assembly?
    4. If you mean part configurations, are you patterning any multi
    configuration parts and using different configurations of the same part
    in the pattern?
    5. If assembly configurations, what is changing between configurations?

    And of course, which SW version are you using?
     
    TOP, Sep 3, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ncopy routine or move nested object

  2. Nested error trapping used incorrectly.

  3. Remake block with selected nested objects

  4. Solution for commands nested more than 4 deep

  5. nested commands in ACAD 2002

  6. Error: command nested 4 deep

  7. Commands May not be nested more than 4 deep error.

Loading...