Need some help

Discussion in 'AutoCAD' started by DaoAnh, Oct 9, 2004.

  1. DaoAnh

    DaoAnh Guest

    I have a HP5100 printer. In Cad14, I use the HP-GL2 devices ADI 4.3 for Autocad by HP ( Model : HP LaserJet 4-NR ). When I print I can't select paper in the Device and Defautl Selection box as System Printer ADI 4.3 by Autodesk, Inc(tray1 is A4 paper, tray2 is A3 paper).
    I want use HP-GL2 devices ADI 4.3 for Autocad by HP and I can select the paper. Would you help me?
    Thanks!
     
    DaoAnh, Oct 9, 2004
    #1
  2. DaoAnh

    Jan van de Poel Guest

    You could try the Laserjet 4MV driver, we use that one also.
    The driver for the 5100 s.cks.(even in ACAD2002)

    Regards,
    Jan

    Autocad by HP ( Model : HP LaserJet 4-NR ). When I print I can't select
    paper in the Device and Defautl Selection box as System Printer ADI 4.3 by
    Autodesk, Inc(tray1 is A4 paper, tray2 is A3 paper).
     
    Jan van de Poel, Oct 11, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Attention Autodesk Programmers - Need some help!!

  2. Need some help trouble shooting.

  3. Need some basic ftp setup help

  4. Need some help on IC5.033

  5. need some help regarding monte carko model of R and C

  6. infrasoft MX users, need some help

  7. need some help installing pro e wildfire

  8. I need some help with mirrored parts....

Loading...