Need HELP finding, Sheet Metal Fabrication Job Shop

I am looking for recommendations and help finding a few Sheet Metal
Fabricators in Orange, Riverside or LA County California.

I am hoping some in this group have used a local sheet metal fabricator
in my area and can recommend them.

I have more than 100 part numbers I need to find a supplier for. These
are fabricated parts and some will need to be assembled by the supplier
which requires welding.

The work is:

1) All parts are 416 Stainless Steel.
2) Vast majority of the work is #11 Gauge but a few parts go up to
1/4" thick.
3) All but about 10 part numbers are simple cuts and bends.

Thank you,
Tom

(No TROLL's please)

 

Have you considered calling the sheet metal supply houses in the area?
I'd wager that they know their customers.

 

Tom, if you can include Kern County..bakersfield..I highly recommend
Metal Tech

I can get their number if you need it.

Gunner



"If I'm going to reach out to the the Democrats then I need a third
hand.There's no way I'm letting go of my wallet or my gun while they're
around."

"Democrat. In the dictionary it's right after demobilize and right
before demode` (out of fashion).
-Buddy Jordan 2001

 

Cliff,

I know you've had a couple of hard days getting slammed, punked and
bitch slapped at the alt.machines.cnc group so I will take it easy on
you.
I specifically stated "No TROLLS please", Cliff you are the Poster
Child for TROLLS so this means you.

I am looking for recommendations from people in these groups with
experience who have used someone in my area and they can recommended
them.

Tom

Clueless Buzzword King Cliffie getting Bitch Slapped:
"

 

Gunner,

Yes, please do forward the information to me, I did not consider Kern
County.

I would be willing to go out as far out as Kern, San Bernardino and San
Diego Counties.

Tom

 

Gotta be local? If you are willing to go outside the local area, let me
know. We do mostly stainless fabrication including a ton of sheet metal
work in all gauges. We also do our own punching and forming dies when
the parts dictate.

If you can bend the miles, lemme know (yea, it's just south of Vancouver
Canada but we ship 99% to the US and keep the customs hassle blind to
the customer) and I can give you the full "sales pitch".

Koz

 

Koz,

Reason # 1 for local is that shipping costs will be an issue when the
product goes into full production.
Reason #2 for local it's easier to drop in and help or check the
progress of the jobs.

Send me a little something in a private email and I will pass your
offer along and the customer will make the decision.

my email address is :
in the subject line put: Sheet Metal Fabrication Job Shop

Thank you,
Tom

 

i would look at http://www.mfgquote.com/. they have an extensive
listing of fabricators in the Los Angeles area. iQ

 

Ask their suppliers <g>.
Often the best source of info.

HTH

 

iQ,

Thank you for your input,

Tom

 

Cliff,

As usual you can't comprehend simple instructions even when I clearly
stated this means you.

I specifically and clearly stated this to you and I repeat myself for
the third time "No TROLLS please". Cliff I repeat for the second time
you are the Poster Child for TROLLS so this means you.

Sincerely,
Tom

 

HELLO,

Any body out there? CLIFF?

Reaper.

 

Roy,

It may seem a little harsh to you however Cliff is a troll, we have a
history and I specifically asked for no trolls. Cliff knew exactly who
and what I meant and yet he still posted and not just once.

Tom

 

Would you call me at (949) 645-7601. We are MarMachine, in Costa Mesa,
CA and have over 25 years experience in dealing with light plate
fabrication. Leigh

 

Leigh,

I will call tomorrow morning,

Thank you,
Tom

 

Metal Tek CO
South H Street, Bakersfield, CA 93304
phone: (661) 832-6011


Tell them you were refered by the OmniTurn service guy.

They are full service, brakes to lazers to waterjet, lots of large
stainless assemblies etc for ag, and tiny lil stuff for the electonics
folks.

Gunner



"If I'm going to reach out to the the Democrats then I need a third
hand.There's no way I'm letting go of my wallet or my gun while they're
around."

"Democrat. In the dictionary it's right after demobilize and right
before demode` (out of fashion).
-Buddy Jordan 2001

 

Gunner,
Does Metal Tech also do welding and machining? I am needing to find a
reliable, accurate fabricator that can do sheet, welding and some
machining ( mild steel ). I would prefer that the company be in SoCal,
but that's not critical. The contractor we are presently dealing with
is absolutely horrible. They evidently haven't mastered the art of
using things like a tape measure or square ( and their welders can't
lay a decent bead ). I spend countless hours deconstructing and
rebuilding the garbage they send us. So, we are looking for a new
fabricator. I can build all this stuff myself, but I like to go home
once in a while. Any tips would be appreciated.

Jim

 

Gunner,

Thanks, I will give them a call tomorrow.

Tom

 

Email me at gunner at lightspeed dot net and Ill have some suggestions
for you. Give me some info on the product type,size, material etc and
I can line you up with the right folks.

Gunner



"If I'm going to reach out to the the Democrats then I need a third
hand.There's no way I'm letting go of my wallet or my gun while they're
around."

"Democrat. In the dictionary it's right after demobilize and right
before demode` (out of fashion).
-Buddy Jordan 2001

 

And very good too. With some fascinating clients

I didnt think of Leigh, as Id not seen your type of product
manufactured there..but they are more than skilled enough and have the
right equipment.


Gunner



"If I'm going to reach out to the the Democrats then I need a third
hand.There's no way I'm letting go of my wallet or my gun while they're
around."

"Democrat. In the dictionary it's right after demobilize and right
before demode` (out of fashion).
-Buddy Jordan 2001