Need a demo of a barel cam or roller feed

Discussion in 'SolidWorks' started by plasticmoldedproducts, Oct 25, 2006.

  1. plasticmoldedproducts

    plasticmoldedproducts Guest

    Is there a machinery designer in this group that is an expert on the
    design and use of a barel cam, and also of a roller feed. It would be
    great if I could see how the linkage is hooked up to the cam and
    machinery. We received quotes on air feeding equipment that was almost
    like telephone numbers and we need an alternate road to travel.We are
    in need of some equipment to feed long lengths of extruded round, small
    diameter plastic type material in order to cut it into short lengths
    with a tolerance of .005".
    Cheers,
    Mike
     
    plasticmoldedproducts, Oct 25, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Using to feed points to DEFINE method in MAPBREAK command?

  2. PyCell Studio & PCell Xtreme demo online

  3. Roller Gear Drive

  4. DLL. Solidworks Add-in (no feed back)

  5. "cosmetic" roller chain -- how to?

  6. CAM works vs Master CAM

  7. Free Roll-feed Pen Plotter located in New Hampshire

  8. Need demo floor plans

Loading...